Five common signs that show you need hot water system repairs service
If you rely on hot water for various activities in your day to day life, then it might be quite inconvenient if your hot water system is not working properly. But other than using it, many people do not even think about their maintenance and how they need to care for their hot water systems. You can find the best professional for Hot Water System Repairs services in Katoomba service. By hiring a professional service, you can make use of your hot water system more effectively. Here are some common signs that show you need a hot water system repairs service.
Water that is only lukewarm
When you detect that you are not getting the water that is hot enough, then it is definite signs that your hot water system might need to be fixed. Every hot water system will have a temperature control valve; when it becomes faulty, it is common to have fluctuations in the water. Fluctuating water temperatures are a very common sign that your heater needs help, so if best to call in a professional for Hot Water System Repairs service in Katoomba to get to the route of issues if you notice this.
There are a few reasons why your hot water heater is not producing enough or any hot water, and here are some reasons.
- Thermostat settings – The first and foremost reason why your hot water system may not be producing much, if any, hot water is that the thermostat is incorrectly set. In some cases, you might recently work around the thermostat. If this is the case, it is possible that it was accidentally left lower than a preferable setting. Ideally, the thermostat should be set between 120 and 140 degrees Fahrenheit, so check with your thermostat setting
- Heating element – You may also experience a sudden lack of hot water if a heating element in the tank gave out or is giving out. Gas-powered water heaters use a burner to heat the water, so it can go bad over time if you do not properly maintain them.
Strange noises are another sign that your hot water system needs to be repaired. If you detect hissing or sizzling noise coming from your hot water, it could mean that you will need to replace the entire system. The strange noises could also just be that your relief valve is faulty, and in this case, simply replacing the relief valve should have your system back up and running in no time. Even though your system is not working properly after replacing the valve system, then you might need to replace the entire system.
If you find any other strange noises like banging, popping, cracking sounds, it could simply mean that there is a buildup of sediment at the bottom of the tank. All these sounds are produced by steam escaping from underneath the sediment. It is important to address the problem as soon as it happens, as an excessive buildup of sediment can cause corrosion and overheat, which could cause the system to fail. These signs also mean the system has to work much harder to produce hot water, which will ultimately age the system a lot quicker.
Sludge or rust
When you detect any sludge or rust around the fittings of your hot water heater, it is usually a sign that there is a leak. If you find sludge, you can try to tighten the fittings, and if tightening doesn’t work, you may need to replace the fittings altogether. Leaks are generally one of the most difficult problems to fix in hot water systems, so approach the best professional to solve this problem.
It is the other sign that you show that your hot water system might need a repair service. When you detect that your hot water tap is coming out red, brown or rust-coloured, corrosion in your hot water tank could mean that there is corrosion. In every hot water tank, there is a sacrificial anode that prevents corrosion that should be routinely replaced. If you detect discoloured water from your tap, the most likely cause is that the sacrificial anode was not replaced when it needed to be, causing corrosion in the tank.
The buildup of sediment is also another reason for discoloured water coming from your hot water tank. So first, check with your tank whether there is a buildup of sediment, if there is any sediment, you can be easily fixed by simply flushing the sediment out of the system. If there is no sediment, then you have to approach the professional. The sediment buildup can also cause corrosion or overheating in the tank and should be addressed as soon as possible as a heavily corroded tank will have to be replaced.
The other sign that your hot water system may be on its way out is if it springs a leak. Leaks can also cause damage to surrounding areas, including floors, walls, carpets and cabinets. The first thing you should do is check to see if you can find its source. Normally it could commonly occur from inlet or outlet connections and tighten the fittings. You should approach a hot water specialist as soon as you discover that there is a leak in the system as ignoring the problem can lead to mould and mildew, which could cause health problems for the whole household.
The bottom line
If you detect any of the signs as above-mentioned above, you need to approach the Hot Water System Repairs services in Katoomba to get the best service. It is important to approach the best and professional hot water system service provider to get the best service.
Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.
Enter your contact details here to help us serve you better & faster.
We offer a full line of services for all your plumbing and drain cleaning needs.